1·The relative heat radiation rate of pyrophyllite is fairly low.
叶蜡石相对热辐射率较低。
2·Cylinder head made of aluminum alloy, which is light-weight and excellent in heat radiation.
气缸盖采用铝合金材料制成，具有重量轻，重量和散热良好。
3·Adopt the way of infrared heating to roast the materials by heat radiation from the pipe heaters.
本烤箱采用红外线或燃气加热方式将热能辐射于被烘烤物体上。
4·Spitzer was able to spot the band because it sees infrared light, or heat radiation, from objects.
斯皮策望远镜能发现环带是因为它能看到红外光，或者说是物体本身的热辐射。
5·The green environmental protection without pollution, cold light source design, no heat radiation.
绿色环保无污染，冷光源设计，无热辐射。
6·Optical head device, optical disk apparatus using optical head device, and heat radiation mechanism.
光头装置，使用光头装置的光盘设备，以及热辐射机构。
7·The EKV's cooled infrared sensors will be capable of detecting even the smallest amounts of heat radiation.
EKV冷却后的红外传感器即使在最小的热辐射下也能进行探测。
8·Results show that the heat radiation level in cylinder is variable under different operation condition.
研究表明，在不同的运转工况下，发动机缸内的辐射热量是变化的。
9·The disk body structure USES the heat radiation rib, which has good ventilation and good heat radiation.
盘体结构设计上采用散热筋，具有良好的通风散热性。
10·In total heat of radiator, convection heat radiation accounts for about 61%, and radiant heat is about 39%.
实验散热器总放热量中，热对流放热量约占61%，辐射放热量约占39%。
1·The machining center location should be away from the source, should avoid direct sunlight and heat radiation, avoid the influence of moisture and air.
加工中心的位置应远离振源、应避免阳光直接照射和热辐射的影响，避免潮湿和气流的影响。
2·Spitzer was able to spot the band because it sees infrared light, or heat radiation, from objects.
斯皮策望远镜能发现环带是因为它能看到红外光，或者说是物体本身的热辐射。
3·Heat-transfer coefficient, heat resistivity, heat conductivity, heat exchanger, heating convection, heat conduction, heat radiation, heat convection exchange.
传热系数，热阻率，导热系数，换热器，热对流，热传导，热辐射，对流传热。
4·The average transmittance of the coatings in visible light spectrum is up to 75%, and 73% in infrared region, which can provide effective insulation for heat radiation.
光谱分析证实其在可见光区平均透过率可达75 % ，在红外区阻隔率达到73% ，能对热辐射起到有效的阻隔作用。
5·Uses: Oilfield well control operations, metal smelting and chemical industryes such as a heat source or heat radiation of high-temperature environments.
用途：油田井控制作业，金属冶炼及化工行业等有热源或热辐射的高温环境。